ISIC Rev 4 2710 to HS 2022

Slag, granulated (slag sand); from the manufacture or iron or steel

Slag, dross; (other than granulated slag), scalings and other waste from the manufacture of iron or steel

Iron; non-alloy pig iron containing by weight 0.5% or less of phosphorus, in pigs, blocks or other primary forms

Iron; non-alloy pig iron containing by weight more than 0.5% of phosphorus, in pigs, blocks or other primary forms

Iron; alloy pig iron; spiegeleisen, in pigs, blocks or other primary forms

Ferro-alloys; ferro-manganese, containing by weight more than 2% of carbon

Ferro-alloys; ferro-manganese, containing by weight 2% or less of carbon

Ferro-alloys; ferro-silicon, containing by weight more than 55% of silicon

Ferro-alloys; ferro-silicon, containing by weight 55% or less of silicon

Ferro-alloys; ferro-silico-manganese

Ferro-alloys; ferro-chromium, containing by weight more than 4% of carbon

Ferro-alloys; ferro-chromium, containing by weight 4% or less of carbon

Ferro-alloys; ferro-silico-chromium

Ferro-alloys; ferro-nickel

Ferro-alloys; ferro-molybdenum

Ferro-alloys; ferro-tungsten and ferro-silico-tungsten

Ferro-alloys; ferro-titanium and ferro-silico-titanium

Ferro-alloys; ferro-vanadium

Ferro-alloys; ferro-niobium

Ferro-alloys; n.e.c. in heading no. 7202

Ferrous products; obtained by direct reduction of iron ore, in lumps, pellets or similar forms

Ferrous products; spongy ferrous products and iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms

Ferrous waste and scrap; of cast iron

Ferrous waste and scrap; of stainless steel

Ferrous waste and scrap; of alloy steel (excluding stainless)

Ferrous waste and scrap; of tinned iron or steel

Ferrous waste and scrap; turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles

Ferrous waste and scrap; n.e.c. in heading no. 7204

Ferrous products; remelting scrap ingots

Iron or steel, pig iron, spiegeleisen; granules thereof

Alloy steel powders

Iron or steel, pig iron, spiegeleisen; powders (excluding alloy steel)

Iron or non-alloy steel; ingots (excluding iron of heading no. 7203)

Iron or non-alloy steel; primary forms (excluding ingots and iron of heading no. 7203)

Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (including square) cross-section, width less than twice thickness

Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (other than square) cross-section

Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% of carbon, other than rectangular or square cross-section

Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight 0.25% or more of carbon

Iron or non-alloy steel; in coils, flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief

Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 4.75mm or more

Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 3mm or more but less than 4.75mm

Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of less than 3mm

Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness exceeding 10mm

Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 4.75mm or more but not exceeding 10mm

Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 3mm or more but less than 4.75mm

Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of less than 3mm

Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief

Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness exceeding 10mm

Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 4.75mm or more but not exceeding 10mm

Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 3mm or more but less than 4.75mm

Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of less than 3mm

Iron or non-alloy steel; flat-rolled, hot-rolled, of a width 600mm or more, n.e.c. in heading no. 7208

Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more

Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm

Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm

Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm

Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more

Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm

Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm

Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm

Iron or non-alloy steel; flat-rolled, width 600mm or more, cold-rolled, n.e.c. in heading no. 7209

Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of 0.5mm or more

Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of less than 0.5mm

Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with lead, including terne-plate

Iron or non-alloy steel; flat-rolled, width 600mm or more, electrolytically plated or coated with zinc

Iron or non-alloy steel; flat-rolled, width 600mm or more, corrugated, plated or coated with zinc (not electrolytically)

Iron or non-alloy steel; flat-rolled, width 600mm or more, (not corrugated), plated or coated with zinc (not electrolytically)

Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with chromium oxides or with chromium and chromium oxides

Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium zinc-alloys

Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium, other than plated or coated with aluminium zinc-alloys

Iron or non-alloy steel; flat-rolled, width 600mm or more, painted, varnished or coated with plastics

Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with materials n.e.c. in heading no. 7210

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, 4.75mm thick or more, excluding those of item no. 7211.13

Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, less than 4.75mm thick, excluding those of item no. 7211.13

Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight less than 0.25% of carbon

Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight 0.25% or more of carbon

Iron or non-alloy steel; flat-rolled, n.e.c. in heading no. 7211, width less than 600mm

Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with tin

Iron or non-alloy steel; flat-rolled, of a width less than 600mm, electrolytically plated or coated with zinc

Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with zinc (not electrolytically)

Iron or non-alloy steel; flat-rolled, width less than 600mm, painted, varnished or coated with plastics

Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated, (excluding tin, zinc or plastic)

Iron or non-alloy steel; flat-rolled, width less than 600mm, clad

Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, containing indentations, ribs, grooves or other deformations produced during the rolling process

Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, of free-cutting steel

Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring less than 14mm in diameter

Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring 14mm or more in diameter

Iron or non-alloy steel; bars and rods, forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling

Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, including those twisted after rolling, of free-cutting steel

Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, of rectangular (other than square) cross-section

Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, other than of rectangular cross-section

Iron or non-alloy steel; bars and rods, of free-cutting steel, cold-formed or cold-finished, n.e.c. in chapter 72

Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, cold-formed or cold-finished, (not free-cutting)

Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, n.e.c. in heading no. 7215

Iron or non-alloy steel; U, I or H sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm

Iron or non-alloy steel; L sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm

Iron or non-alloy steel; T sections, hot-rolled, hot-drawn or extruded, of a height less than 80mm

Iron or non-alloy steel; U sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

Iron or non-alloy steel; I sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

Iron or non-alloy steel; H sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

Iron or non-alloy steel; L or T sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, hot-rolled, hot-drawn or extruded

Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, obtained from flat-rolled products

Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, (not obtained from flat-rolled products)

Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, cold-formed or cold-finished, from flat-rolled products

Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216

Iron or non-alloy steel; wire, (not plated or coated), whether or not polished

Iron or non-alloy steel; wire, plated or coated with zinc

Iron or non-alloy steel; wire, plated or coated with base metals (other than zinc)

Iron or non-alloy steel; wire, n.e.c. in heading no. 7217

Steel, stainless; ingots and other primary forms

Steel, stainless; semi-finished products, of rectangular (other than square) cross-section

Steel, stainless; semi-finished products, other than of rectangular cross-section

Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness exceeding 10mm

Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 4.75mm or more but not exceeding 10mm

Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 3mm or more but less than 4.75mm

Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of less than 3mm

Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness exceeding 10mm

Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 4.75mm or more but not exceeding 10mm

Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 3mm or more but less than 4.75mm

Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of less than 3mm

Steel, stainless; flat-rolled, width 600mm or more, cold-rolled or cold-reduced, of a thickness of 4.75mm or more

Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more but less than 4.75mm

Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm

Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm

Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm

Steel, stainless; flat-rolled, width 600mm or more, n.e.c. in heading no. 7219

Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of 4.75mm or more

Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of less than 4.75mm

Steel, stainless; flat-rolled, width less than 600mm, cold-rolled

Steel, stainless; flat-rolled, width less than 600mm, n.e.c. in heading no 7220

Steel, stainless; bars and rods, hot-rolled, in irregularly wound coils

Steel, stainless; bars and rods, hot-rolled, hot-drawn or extruded, of circular cross-section

Steel, stainless; bars and rods, hot-rolled, hot-drawn or extruded, other than of circular cross-section

Steel, stainless; bars and rods, cold-formed or cold-finished

Steel, stainless; bars and rods, n.e.c. in heading no. 7222

Steel, stainless; angles, shapes and sections

Steel, stainless; wire

Steel, alloy; ingots and other primary forms

Steel, alloy; semi-finished products

Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, grain-oriented

Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, (other than grain-oriented)

Steel, alloy; flat-rolled, width 600mm or more, hot-rolled, in coils

Steel, alloy; flat-rolled, width 600mm or more, hot-rolled, not in coils

Steel, alloy; flat-rolled, width 600mm or more, cold-rolled

Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, electrolytically plated or coated with zinc

Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, plated or coated with zinc (other than electrolytically)

Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, (other than plated or coated with zinc)

Steel, alloy; flat-rolled, width less than 600mm, of silicon-electrical steel, grain-oriented

Steel, alloy; flat-rolled, width less than 600mm, of silicon-electrical steel, other than grain-oriented

Steel, alloy; flat-rolled, width less than 600mm, of high speed steel

Steel, alloy; flat-rolled, width less than 600mm, (excluding silicon-electrical or high speed steel), hot-rolled

Steel, alloy; flat-rolled, width less than 600mm, (excluding silicon-electrical or high speed steel), cold-rolled

Steel, alloy; flat-rolled, width less than 600mm, n.e.c. in item no. 7226.9

Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, of high speed steel

Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, of silico-manganese steel

Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7227

Steel, alloy; bars and rods, of high speed steel

Steel, alloy; bars and rods, of silico-manganese steel

Steel, alloy; bars and rods, hot-rolled, hot-drawn or extruded

Steel, alloy; bars and rods, forged

Steel, alloy; bars and rods, cold-formed or cold-finished

Steel, alloy; bars and rods n.e.c. in heading no. 7228

Steel, alloy; angles, shapes and sections

Steel, alloy or non-alloy; hollow drill bars and rods

Steel, alloy; wire, of silico-manganese steel

Steel, alloy; wire, of materials other than silico-manganese steel

Iron or steel; sheet piling, whether or not drilled, punched or made from assembled elements

Iron or steel; angles, shapes and sections, welded

Iron or steel, railway or tramway track construction material; rails

Iron or steel, railway or tramway track construction material; switch blades, crossing frogs, point rods and other crossing pieces

Iron or steel, railway or tramway track construction material; fish-plates and sole plates

Iron or steel, railway or tramway track construction material; n.e.c. in heading no. 7302

Cast iron; tubes, pipes and hollow profiles

Iron or steel (excluding cast iron); seamless, line pipe of a kind used for oil or gas pipelines, of stainless steel

Iron or steel (excluding cast iron or stainless steel); seamless, line pipe of a kind used for oil or gas pipelines

Steel, stainless; seamless, drill pipe, of a kind used in drilling for oil or gas

Iron or steel (excluding cast iron or stainless steel); seamless, drill pipe, of a kind used in drilling for oil or gas

Steel, stainless; seamless, casing and tubing, of a kind used in drilling for oil or gas

Iron or steel (excluding cast iron or stainless steel); seamless, casing and tubing, of a kind used in drilling for oil or gas

Iron or non-alloy steel (excluding cast iron); seamless, cold-drawn or cold-rolled, tubes, pipes and hollow profiles of circular cross-section

Iron or non-alloy steel (excluding cast iron); seamless, (excluding cold-drawn or cold-rolled), tubes, pipes and hollow profiles of circular cross-section

Steel, stainless; cold-drawn or cold-rolled (cold-reduced), tubes and pipes of circular cross-section

Steel, stainless; (excluding cold-drawn or cold-rolled), tubes pipes and hollow profiles of circular cross-section

Steel, alloy (not stainless steel); seamless, cold-drawn or cold-rolled (cold-reduced), tubes, pipes and hollow profiles of circular cross-section

Steel, alloy (not stainless steel); (excluding cold-drawn or cold-rolled), tubes, pipes and hollow profiles of circular cross-section

Iron or steel (excluding cast iron); seamless, tubes, pipes and hollow profiles, seamless, n.e.c. in heading no. 7304

Iron or steel (excluding cast iron); line pipe of a kind used for oil or gas pipelines (not seamless), longitudinally submerged arc welded, having circular cross-sections, external diameter exceeds 406.4mm

Iron or steel (excluding cast iron); line pipe of a kind used for oil or gas pipelines (not seamless), longitudinally welded (not submerged arc welded), having circular cross-sections, external diameter exceeds 406.4mm

Iron or steel (excluding cast iron); line pipe of a kind used for oil or gas pipelines (not seamless), (not longitudinally welded), having circular cross-sections, external diameter exceeds 406.4mm

Iron or steel (excluding cast iron); casing of a kind used in drilling for oil or gas (not seamless), having circular cross-sections, external diameter exceeds 406.4mm

Iron or steel (excluding cast iron); tubes and pipes (other than line pipe or casing of a kind used for oil or gas pipelines), longitudinally welded, having circular cross-sections, external diameter exceeds 406.4mm, (not seamless)

Iron or steel (excluding cast iron); tubes and pipes (other than line pipe or casing of a kind used for oil or gas pipelines), welded (not longitudinally welded), having circular cross-sections, external diameter exceeds 406.4mm, (not seamless)

Iron or steel (excluding cast iron); tubes and pipes n.e.c. in heading no. 7305, having circular cross-sections, external diameter exceeds 406.4mm, (not seamless)

Steel; stainless; line pipe of a kind used for oil or gas pipelines n.e.c. in chapter 73, welded, (not seamless)

Iron or steel (excluding cast iron); line pipe of a kind used for oil or gas pipelines (other than of stainless steel or seamless), n.e.c. in chapter 73

Steel, stainless; casing and tubing of a kind used in drilling for oil and gas, n.e.c. in chapter 73, welded, (not seamless)

Iron or steel (excluding cast iron); casing and tubing of a kind used in drilling for oil and gas (other than stainless steel or seamless), n.e.c. in chapter 73

Iron or non-alloy steel (excluding cast iron); tubes and pipes (not seamless), welded, of circular cross-section, n.e.c. in chapter 73

Steel, stainless; tubes, pipes and hollow profiles, welded, of circular cross-section, n.e.c. in chapter 73

Steel, alloy; tubes, pipes and hollow profiles (other than stainless steel or seamless), welded, of circular cross-section, n.e.c. in chapter 73

Iron or steel (excluding cast iron); tubes, pipes and hollow profiles (not seamless), welded, of square or rectangular cross-section, n.e.c. in chapter 73

Iron or steel (excluding cast iron); tubes, pipes and hollow profiles (not seamless), n.e.c. in chapter 73, welded, of non-circular cross-section (not square or rectangular cross-section)

Iron or steel (excluding cast iron); tubes, pipes and hollow profiles (not seamless), n.e.c. in chapter 73

Cast iron; cast fittings, of non-malleable cast iron

Iron or steel; cast fittings, other than of non-malleable cast iron

Steel, stainless; tube or pipe fittings, flanges, of stainless steel

Steel, stainless; tube or pipe fittings, threaded elbows, bends and sleeves

Steel, stainless; tube or pipe fittings, butt welding fittings

Steel, stainless; tube or pipe fittings, n.e.c. in item no. 7307.2

Iron or steel; tube or pipe fittings, flanges, other than stainless steel

Iron or steel; tube or pipe fittings, threaded elbows, bends and sleeves, other than stainless steel

Iron or steel; tube or pipe fittings, butt welding fittings, other than stainless steel

Iron or steel; tube or pipe fittings, n.e.c. in item no. 7307.9, other than stainless steel

Vessels and other floating structures; for breaking up